11. Hot Rod Power Tour 2014 – Part 3/3

Posted on June 28, 2014 by hooglanda

Quartermile:
Skip to the end and read about the Jason’s if you dont want to read the whole article because those guys are cool! But I’d read the whole thing if you have time (or at least look at the pictures cuz there’s lots of cool stuff on HRPT!)
This was my experience of the 2014 Hot Rod Power Tour.
This article covers the last 2 days, Thursday in Bettendorf, IA and Friday in Wisconsin Dells, WI.
It’s probably the greatest moving car show in the world.
It’s a week long.
You need to do it!
Below are the links to my first 2 articles about days 1-5 and an article on the cost, it’s worth it!
https://mywheellife.com/2014/06/15/8-my-wheel-life-hot-rod-power-tour-part-1/
https://mywheellife.com/2014/06/19/10-my-wheel-life-hot-rod-power-tour-part-2-of-3/
https://mywheellife.com/2014/06/17/9-what-does-hot-rod-power-tour-cost-answer-its-worth-it/

The Final Leg
The last two days of HRPT 2014 were probably the most fun for us. The big thing was our car was fixed! No more clunking or brake pads rubbing. That really makes for a much more relaxing drive when you aren’t thinking your car will shoot you off the side of a mountain.
We woke up Thursday June 12th in Crown Point, IN. The drive this day was to Bettendorf, IA. There was a lunch stop at Heidts at Lake Zurich, IL. http://www.heidts.com/
They design/manufacture suspension/chassis/brake parts for muscle and street cars. They gave a very interesting tour and had a free lunch for HPRT participants. They even pulled a few HPRT participants vehicles, who were having serious suspension issues, up on a lift and fixed ‘em up! Cool guys! Unfortunately I didn’t take many pictures there but I did get one of this HUGE Dodge truck (I’m 6’1” for reference).

We continued on to Bettendorf. On the way in we parked a ways away and walked to the Isle Casino because we were told (via the HRPT facebook page) that the line was very long to get in. On that note it’s very useful to get info via the HRPT FB page during the tour! Per usual there were a ton of cool rides at the show. Here’s just a list of a few.

Cool drag race Mustang. This looks like a serious performance machine which distinguishes it from a pro-street style car, which are often built to look like they are fast but sometimes are, sometimes aren’t.

A second cool fox body mustang with serious drag race rubber under the back.

One of my favorite cars that I’d been seeing most of the week was an old (Plymouth I’m assuming) sedan done up like a Richard Petty race car. I was finally able to snap a few pictures of it.

The awesome Richard Petty… Plymoth?

Another interesting car I saw was this (2007 ish) Mustang done up in a Mad Max style. (There’s a new Mad Max Movie coming out) http://bangshift.com/general-news/first-official-pictures-new-mad-max-cars-unveiled-semi-truck-whole-benz-cab-yes-please/

Mad Max mustang

Another car I had seen earlier in the week was this pink Mercury Capri Pro-Street style car. It has a very distinctive late 1980’s/early 1990’s Pro-street style, denoted especially by the roll cage, and tubs to fit the wide tires. A few other clues that this is the older Pro-street style are the body color grill and the early 90’s style graphic on the lower door. Overall a very cool car that has been featured in Hot Rod (and many other) magazines.

Mercury Capri Pro-Street style car

One unfortunate thing we saw was this 1969 Chevelle/Malibu that had the top part of his cowl hood come off! In true HRPT fashion though they were making the best of it. They had put a few zip ties on to hold it down and kept driving it! A Roadkill sticker tops it off nicely. Nice looking car! (Easiest way to tell a 1969 from a 1969 is a 1969 has a 1 piece door window while a 1968 has a vent window at the front of the door)

Unfortunate cowl hood failure! They made the best of it tho!

On our walk back to the car we stopped at a shop on the corner where some locals were encouraging burnouts. It was great! They even gave us a drink. We stayed about 15 minutes watching burnouts until the police put a stop to the fun. I was told this had been going on all day though.

Boo. Cops.

This was at the corner station also.

Since I grew up on a farm AND work for JD I had to include the old 2 cylinders

My dad is a big fan of old Mack semi’s and has a few himself. I had to take a picture for him.

B-61 Mack tow truck

The final day (open to the public) was Friday 6-13-2014. We left Bettendorf, IA on our way to Wisconsin Dells, WI. We drove up 61 in Iowa passing through Maquoketa, Iowa. What a great little town! There was a man directing traffic (burnouts!) and a lot of locals watching from the sidewalk. There was even a gentleman from the town sitting in the back of an old pickup commenting (with speakers and a microphone!) on the cars coming by. This was one of the highlights of the trip! We stopped and watched for about 20 minutes, took a few pictures of awesome cars at the gas station, and then it was on our way.

We spotted another Richard Petty tribute car on the way.

Upon arrival to Wisconsin Dells we were aware of a long back up, it was a 2 hour sit in traffic (1-3 pm) for us to get from the highway to the show. Once through, it was worth it! I was told that the resort was told to expect a much lower number of cars than showed up, so I guess thanks to them for letting us park on their golf course! Hopefully we didn’t tear it up too much. The show was very cool again! One cool 4×4 I saw was this 1970’s Ford!

Another cool Ford was this cool GT40 (or replica?)

Assuming it’s a new Ford GT and not an older GT40 by the stripe on the bottom of the door.

And there was this also Mad Max style Dodge charger. I especially liked the sickle mower guards in/under the grill for teeth (I grew up on a farm).

Mad Max like Charger

One of the coolest stories of Power Tour was the 2 Jason’s from Minnesota. They purchased this 1966 Ford pickup sight unseen from Craigslist, in Tennessee! They flew there, drove to Charlotte and Long Hauled it home! True Roadkill style. They did put new tires on the truck, and lots of duct tape to seal the windshield.
Jason (which one I’m not sure) told me that they had a few problems, a broken push rod, the fan ate the radiator because they were doing burnouts and probably broke a motor mount etc. They were considering selling it when they were done but the fanfare they got from everyone (including David Freiburger (David Freiburger is the editor-in-chief of Hot Rod magazine and Hot Rod Deluxe magazine and host of Roadkill. He’s the former editor of Car Craft, Rod & Custom, 4-Wheel & Off-Road, and Hot Rod Deluxe. Often seen and heard on Hot Rod TV. – Borrowed directly from his Facebook page) for those of you who don’t know who David Freiburger is, made them consider doing some upgrades and keeping the truck. We’ll see what they do next year!

Jason and Jason’s Road kill 1966 Ford pickup with a 460!

Saturday was for Long Haulers only. We recieved our awesome tin signs showing we were Long Haulers. There was a group picture of all the HRPT Long Haulers, which we missed. Woops. We were able to get our picture in from of the Hot Rod motorhome thingy, so that was cool. That was the end of the HRPT 2014.
Next year HRPT SHOULD start in Wisconsin Dells. If you are anywhere near the start you should at least come for the first day. Do the long haul if you can! Hope you enjoyed reading about it. One thing I found interesting was the lack of general public knowledge of HRPT. Please share with your friends and help continue to make this one of the greatest car destinations ever!

Per usual please share with your friends, follow via email, like the FB page (to get daily links to cool stuff) like this
http://wildsau.ca/2014/06/car-stuff-man-cave/
or this
http://forums.evolutionm.net/loft-evom-car-talk-corner/423729-i-got-beat-geo-prizm-pics.html

Thanks for reading. Keep the rubber side down and please Visit us on Facebook.

10. My Wheel Life – Hot Rod Power Tour 2014, Part 2 of 3

Posted on June 19, 2014 by hooglanda

Quartermile
Continued coverage of HRPT 2014
The greatest road trip in America!
Check my Part 1 if you haven’t yet.
https://mywheellife.com/2014/06/15/8-my-wheel-life-hot-rod-power-tour-part-1/

Clean Chevelle (to show you all I’m not only about rat trucks!)

The Full Mustang?

Tuesday June 10th 2014 Drive from Charleston, WV to Norwalk, OH
This day started by picking up the parts we had ordered the day before for the Mustang, lower a-arms and front struts. $600 and we were on the road with the rest of the tour.
We arrived at Summit Motorsports Park around 3 pm. This was one of the easiest venues to get into. I suppose because they had plenty of room and are set up to handle that many cars? We parked the Mustang by the GM rescue mechanics. As I mentioned before, if you are having serious problems and bring these guys parts and a broken car, they will fix it, no charge! This is my official “Thank You” to those guys!

GM mechanics saving our Ford! Great guys!

They won’t swap your new cam in! But if your car has brakes fading away, clunky suspension (guilty) or other safety issues they will help in a heart beat. They also were helping some guys with rough running vehicles, etc once they got caught up on the safety stuff. I asked Robbie to watch the car get fixed while I went and got my Golden ticket for the Comp Cams drawing. I talked with quite a few folks while walking around in my Spartan outfit. Many people gave me thumbs up and took pictures. A few shook their heads, some asked if I lost a bet, all understandable.

HRPT golden ticket Spartan!

One guy I talked to while walking around was David Brown. He had 2 vehicles on Power tour, a 1928 Ford and a 1964 Ford, both trucks.

David Brown, 1928 Ford

David Brown 1964 Ford truck. Very cool shop truck style!

Once our car got fixed and I received my Golden Ticket we walked around a little. We ran into the guys driving the Evil Atom. They have to at least be in the running for the toughest guys on power tour. This year was pretty nice weather, but the lack of any roof makes it even tougher to drive (through rain) than most rat rods, and this is something like these guys 6 HRPT.
http://evilatom.com/

Evil Atom (Screen shot stolen from the Evil Atom website)

That night we stayed at a small hotel and once again meet some cool folks there. Robert Brown (no relation to David) shared with us his 1973 Firebird. What a clean car!

Robert Brown’s Firebird

Don’t drink the Kool-aid from the Firebird’s radiator!

Wednesday June 11th Norwalk, OH to Crown Point, IN
The next day we headed out and what a great drive that was! No clunking, our stuck brake pad had been replaced, the drive was quiet and we could actually enjoy it! Today’s drive included a stop at Lane Automotive. We choose to skip it, much to my angst now. I was told by fellow Power Tourer’s that it was a great stop! I guess the lesson here is “Never skip a lunch stop!”
We arrived at Lake County Fairgrounds in Crown Point, IN around 3 pm. This was a very cool stop! The fairgrounds was a very cool setting, it wasn’t rows of cars, they were parked in between trees, around a lake etc. It made for a nice walk. There were a ton of great cars this day (just like every other day).
I met Bobby from Sons of Anarchy! (Not actually, but sure looks similar!)
How serendipitous that I had my Sturgis Motorcycle Rally shirt on from last year.

Bobby! (almost)

Actually Bobby from SOA

After checking in we started walking around the pond. This was where we met a ton of cool Hot Rodders!

I had been seeing these “Laid-Back” stickers popping up on everyone’s cars. Shane was putting one on his 1966 Ford with the 7.3 diesel earlier in the week when I met him, and a ton of other vehicles had them on also. I finally took the chance to stop and say to these guys. I talked with Chris Barker at that booth. They had a couple cool woodie wagons there and Batavus scooter. I studied abroad in Holland and this particular model was made in Holland so I am a bit more partial to it than most people.

http://laidbackusa.com/

Laid Back scooter/motorcycle. I studied abroad in Holland and this particular model was made in Holland so I am a bit more partial to it than most people. The brand is Batavus.

This car was a popular car at every stop. Didn’t get the guys name.

This was a very popular car at HRPT. It has a overhead cam Inline 6 cylinder Pontiac engine. Quite the unique power plant! The rest of the car was very unique also.

Here’s another vehicle I didn’t get much info on but I thought the rusty flames were pretty neat!

cool rust flames!

The next vehicle I stopped at was the Ring Brothers party camper. These guys build incredible cars. Check out this custom Pantera they recently finished. On the HRPT they were just having fun, I didn’t see any vehicles, besides the party camper, which was pretty awesome!

https://ringbrothers.com/
http://www.autoblog.com/2013/11/06/ring-brothers-adrnln-pantera-sema-2013/

RingBrothers party camper. You see they let me brand their gas tank with a MyWheelLife.com decal. cool guys who build awesome vehicles! Check them out.

After them I walked past the dyno, which was at every stop on the power tour. It was a popular attraction every day.

Saleen Mustang on the traveling dyno

Overlooking the dyno I talked with Ryan of Rusted Knuckles Garage. I was unable to find his website but I did find his youtube channel. Check out the pictures of his truck below. He was running Buick GN turbos from a 3.8 V6 but he had 2 of them on his SBC V8. He was nice enough to let me sit in his cool truck. It was awesome but a bit tight for me! The truck is named “Hands Full” because it’s a handful to control all that power when you hit the gas!

Crazy twin turbo small block Chevrolet rat truck. The turbos were from a Buick Grand National.

The Hands Full truck was a pretty tight fit. That’s what happens when you channel a body over the frame.

Awesome front view of Hands Full!

After Ryan’s truck I ran into another rat. This one was built by Rich of the Hoosier Head Hunters. They were from pretty close by and had brought a few cars. Ryan’s was very cool. If you check out their FB page you can probably get in touch with Ryan. He said the truck was up for sale or trade if you are interested!
https://www.facebook.com/HoosierHeadhunters

Rich from Hoosier HeadHunters car club from Cedar Lake, IN.

There was one more awesome rat truck I took pictures of that day. Are you starting to feel a trend here? Is there something in the water in Indiana? If there is I hope I got some!

Later that night we stayed at Red Roof Inn and there were a TON of hot rodders there! Here’s a few pictures.

Cool HRPT parking lot!

One more vehicle that wasn’t a rat! Quite far from it! This just shows the variability of HPRT vehicles which is what makes it so great!

Cool Lotus on HRPT!

What were your favorite parts of Tuesday/Wednesday of Power Tour 2014 (Norwalk, OH and Crown Point, IN)?
What were your favorite cars?

Very nice 1969 or 1970 Mustang (to show you all I’m not only about rat trucks!)

Crazy Holden Ute from Australia? El Camino anyone?

What was the strangest car you saw on HRPT?
Did you meet as many cool people as I did?
Who was the most interesting person you met?
There are a lot more cool stories from HRPT, more cars, more people, more burnouts! So stay tuned! Subscribe, follow on FB, share with your friends, so you get to read the exciting final HRPT 2014 article (probably sometime in the next week or so).
As always, thanks for reading!
Here are all my pictures from HRPT 2014. They are on my FB page.
https://www.facebook.com/media/set/?set=a.285163794988893.1073741832.278105162361423&type=3
https://www.facebook.com/media/set/?set=a.285152084990064.1073741831.278105162361423&type=3

8. My Wheel Life – Hot Rod Power Tour, Part 1

Posted on June 15, 2014 by hooglanda

Quartermile:
Hot Rod Power tour is a 7 day traveling car show.
It changes it’s route every year.
It starts in Wisconsin Dells, Wisconsin, next year.
You need to attend at least one day, preferably more, if it comes through your town see it!

The Full Monty:

Robbie and I, HRPT long haulers

My college friend Robbie and I participated as “Long Haulers” in the Hot Rod Power Tour (HRPT) this year. What is HRPT you ask? It’s probably the largest touring car show in the world. The core group of hot rod cars are early “hot rods”, 1960’s and 1970’s muscle cars, and late model cars. Some people would argue that HRPT is only for muscle cars or hot rods, in reality just about any cars are welcome, gassers, hot rods, muscle cars (new and old), super cars, kit cars, trucks, rat rods, there are even a few imports. All cars are welcome and most guys on the tour are cool with all cars. The cars are the stars at HRPT but meeting thousands of other hot rodders, talking about what they did to their car, learning tricks and tips for your next build and forming friendships that will last the years, is what HRPT is all about!

Gasser Chevrolet Shoebox (1955 or 1956)

This year HRPT took place from June 7th to June 14th. HRPT changes it’s route every year. There are approximately 1500-2000 “Long Haulers”, people who do every day of the show. There are also thousands of people who show up for one or two days locally wherever the show stops. The show takes a meandering route through the country, avoiding as many interstates and main roads (as possible, usually). This year HRPT started in Charlotte, NC at zMax Drageway-Charlotte Motor Speedway for the opening day. Sunday morning we left from there to Chillhowee Park in Knoxville, TN. From there Monday morning we drove to downtown charleston, WV. Tuesday – Summit motorsports Park, Norwalk, IA. Wednesday – Lake County fairgrounds, Crown Point, IN, Thursday – The Isle Casino, Bettendorf, IA and finally Friday June 13th at Chula Vista Resort in Wisconsin Dells, WI.

http://www.familyevents.com/event/229
There was also a final long hauler only send off early Saturday, June 14th, which we left town by 9 am. I’ll be sharing about half of my trip in this post and half in another. Power tour is too big and awesome for one article!

Onto the show!
The first thing is to get to the start of the show. I left from Iowa early morning Friday June 6th and drove to Knoxville, TN and stayed there. Then I drove to Charlotte, morning Saturday, June 7th for the first day. You can register ahead of time or at the event, I choose at the event and it was $90. The first day was at zMax drag strip in Charlotte, NC. The drag strip was open and a lot of hot rodders were racing their cars. Walking back to my car I met Joe from 513 Motorsports out of Ohio. He had a very cool 1993 Dodge Dakota that is currently running a twin turbo setup and a Megasquirt 3 fuel management system, all built by himself. He said he hadn’t used a tig welder until he bought some pre-bent mandrel tubing and started making his headers. They turned out beautiful! Check Joe out at 513 Motorsports on FB.

513 Motorsports twin turbo 1993 Dodge Dakota, runs 11’s in the quarter mile. Sweet!!!!

Later that night I met up my friend Robbie at our hotel. Hotels are a great place to talk to other HRPT participants. The first guy I talked to was Rick Brooks of the Newberry Car Buffs club. He was driving his 1952 Chevrolet Deluxe. He had a very extensive restoration. He also performed an LT1 engine swap, a huge upgrade over the original I6 in power. This was a very beautiful car and nicely restored.
http://www.newberrycarbuffs.com/

1952 Chevrolet Deluxe, with LT1 (1990’s version), by Rick Brooks, Newberry Car Buffs.

Sunday June 8th 2014
This was the first day driving, we left around 10 am and followed the recommended scenic route. The general daily drives are 200-300 miles. And can take up to 8 hours once you take into account stops, traffic jams (caused by 2000-3000 HRPT cars), lunch breaks and burnouts through small towns. The drive is an integral and fun part of HRPT, especially since there are thousands of cool cars all around you. We rolled into the show around 5 pm. At this show I met a fellow Iowan, Shane Sherman (shanesherman22@hotmail.com), who has his own shop, Honus Motorsports (Like on FB) in Williamsburg, IA. He was driving a very cool 1970’s Ford 2wd truck that he had swapped a 7.3L Ford diesel engine into. He had built that truck between Feb 2014 and June 2014!

Shane’s 1966 (I believe) Ford with a 7.3 diesel

This was also where I saw my favorite build of an 2002 (approximately) Camaro. I really like the side skirts and the “Remember the Buster”tribute to Paul Walker (Bryan Oçonnor – Fast and Furious movies) was also a nice touch.

2002 (ish) Camaro

R.I.P – Paul Walker

A third great vehicle from this day was a late 80’s, early 90’s GMC S-15 that had a modern LS GM engine swapped in. These engine have been swapped into about 1 million vehicles, and a lot of them were on HRPT. It’s a great engine, makes good power, is reliable, good fuel economy and makes tons of power relatively easily.

GMC with LS V8

Another great part of power tour is the hotels. You can meet up with tons of hot rodders in a closer environment, have more time to talk with each other etc. This night we met up with Chris from Oregon. He was driving an old Toyota 4×4 with his brother. It had a a small block Chevrolet V8 swapped in for power. In the same parking lot was a “rat” VW bug and a very new Nissan GTR (one of only a few “tuners/imports” on the HRPT. This just shows the variability of the tour! Great!

VW “rat rod”

Nissan GTR

Monday June 9th 2014
This morning I took my car to a shop to have a lower a-arm bolt tightened. The day before going through the mountains, when braking hard there was a shudder in my steering wheel. That’s not good! We got a bolt tightened and it seemed to have stopped clunking for a while. I met a few hot rodders at the shop so that helped pass the time.
Our next drive was to Charleston, WV. The drive through the mountain was beautiful but part way the car started clunking again. I stopped at Appalachian tire service and spoke with the mechanic, Elvis. He was very gracious and put my car up on a lift and told me that my bushings on the a-arms were shot, so that as good to know so we could fix it.

At Elvis’ shop

While at this stop we were also able to see a cool van, being driven by Rutledge Wood, auto racing analyst and Top Gear (US version) co-host.

Rutledge Wood’s van

Again, we arrived later, 5 pm. I was told parking was difficult and some people had to walk miles to get to the street parking. I ended up having a “creative” parking spot and we were only 2 blocks from the main stage. We walked up and down the row of cars, got out long hauler tags punched and headed out. This night we ate and then drove to Walmart to get supplies. Comp Performance Group (Comp Cams, F.A.S.T. Racing Head Service, and others) has a giveaway each year, a shopping spree to their products. They choose 5 people a day who promote their products. I did it 2 years ago and wanted to get my name in the drawing again, 1/30 change at $10k of car parts I’m in!
Later that night we were able to get parts for the mustang to get it fixed the next day. I also ran into some really cool guys from Level 7 Motorsports. They had built a 1968 C10 (the C if for 2wd, a K is 4wd) truck with an LS engine. The truck had a great patina and I had seen it earlier in the week. I went to get stuff from my car late at night and ended up talking to Jesse and his crew in the parking lot for about an hour. Very cool guys! Check them out on FB at Level 7 Motorsports.

Level 7 1968 C10 with LS V8 swap

This was just the first few days of HRPT. Stay tuned for coverage through the end of the week. Lots of burnouts, more cool car people and more cars on the way!
Thanks for reading. Follow on FB, My Wheel Life, or follow via email at the top of the main page so you don’t miss a post!

All my pictures from HRPT 2014 are on my FB page.
https://www.facebook.com/media/set/?set=a.285163794988893.1073741832.278105162361423&type=3
https://www.facebook.com/media/set/?set=a.285152084990064.1073741831.278105162361423&type=3

7. My Wheel Life – How To: Why to install headers AND how to repaint rusted headers

Posted on June 2, 2014 by hooglanda

A rat rod with long tube headers.

Quartermile:
Headers let your engine breath better, thus increasing performance, speed, acceleration and fun factor!
Use rubber gloves when using paint to avoid paint on your hands and to avoid getting your hand oils on the headers after you have cleaned them, before painting.
Header wrap or High temp paint, or both can be used to protect headers.

The Full Monty
First, if you are newer to engines and modifying them, or if you are an old hand even, you should watch this video and hopefully you can get an idea of the basics of how an engine works. https://www.youtube.com/watch?v=60QX5RY_ohQ

This Model T Ford is a mixture of Gasser and Rat Rod. It’s mostly for fun, and not so much for actual performance. This engine has a straight pipe for each cylinder. They are actually about the best you can get for flow, unless you start dabbling in tuned length runners, etc. It’s really an independent header for each cylinder. I think it’s awesome!

If you are reading this you just might be interested in making the engine perform better in your vehicle of choice. I will use the old old old old analogy, “The engine is an air pump.” If you can get more air (and a corresponding amount of fuel) into the combustion chamber, and ignited, you will make more power and go faster. An important part of the airflow of the engine is the exhaust. This removes the used A/F (air/fuel) mixture out of your combustion chamber and gets it ready for a new mixture. Efficiently removing this air allows more new mixture in, thus making more horsepower.

There are many parts to your exhaust. After the valve and the exhaust port, the exhaust manifolds are the first part of the exhaust making up the system of pipes that lead the exhaust to the back of your car. Usually the factory exhaust manifolds are heavy and ugly. Thus, replacing them with headers is both an appearance upgrade, a weight saving (performance) and makes your engine develop more horsepower (performance x2!).Headers are a popular first or second upgrade for any engine. The best analogy I can give is a water hose. The manifolds would represent squeezing the hose right at the end closest to the water source, if you let that expand, you flow more water. This is in essence what headers do. You see why headers are so great!

These are exhaust manifolds. They do the same job as headers, but they don’t flow as good or make as much horsepower and often weight more because they are cast iron instead of steel tubes, which are thinner. Although headers could weight more because they are longer but they they make more horsepower.

There are a myriad of types of headers and I don’t have the space to write about all of them but I will give you the long and short of it, literally! The two most basic types of headers are called “Long Tube” and “Short Tube” headers. Gearheads like to keep it simple, so the names mean exactly what it sounds like, the physical tubes making up a long tube header are longer. See picture. Long tube headers generally make more peak horsepower, good for racing but they take up more underhood room as they are physically larger. Short tube headers generally are good for a street car because they are easier to install (smaller, less interference with other parts of the car) and they have good lower end torque (idle to ½ throttle) where you are typically driving a street car.

short tube headers

Long tube headers

There are various ways to protect your headers from the elements. The easiest would be to buy stainless steel headers. They don’t rust since they have a high chromium content (>10.5% by mass). Another expensive solution is to have the headers chrome plated. These are very attractive but also expensive. A third solution is to apply your own high temp paint which I will chronicle my experience with below. This is definitely the most “cost effective” method, approximately $50 in materials, max.
One more way to protect your headers is to wrap them. When wrapping headers I would still recommend painting them. The header wrap could actually absorb water and hold it on the headers. Header wrap also will keep your under hood temperatures down and greatly reduce the risk of burning yourself. They are popular on motorcycles and race cars.

This is a Model A Ford Sedan with header wrap. It’s barely visible behind the front tire, but it was the best picture I had, and again, sweet car. Picture is justified in my blog!

How to paint headers:
If you read about My Monte in post #2 https://mywheellife.com/2014/05/20/my-wheel-life-my-monte/
you would have noticed that headers were the first performance upgrade I did. That was 5 years ago and they have become rusty despite the anti-rust coating applied to them by the manufacturer when I bought them. I recently had some starter issues with that car and had to take the headers off to get the starter off. I took that opportunity to re-rustproof the headers. Since headers are the hottest exposed part of the engine they need special paint or coating to protect them from rust, normal paint will burn off.

The first thing you need to do is to remove the rust off the headers. They need to be stripped to bare metal. I used a wire wheel and a 3M varnish/paint remover pad, both mounted on a ½” drill. This worked a lot better, faster, easier than using sand paper. There are a few other ways you could remove the rust and paint. You could use an acid paint/rust stripper. I have never done this but that stuff is definitely abrasive to the hands. You definitely want to use rubber gloves when using that. I have heard it does a very good job cleaning them though. Another way would be a sand blaster, but I believe the drill works fastest and easiest in this case and with the least exposure to chemicals! It took approximately 30 minutes – 1 hour per header.

Headers as they started in the car. Rusty, ugly. Eventually they could have rusted through and I could have had an exhaust leak. That’s not good!

Passenger side. Rusty headers. These have been in the car since 2008 so they were possibly due to be recoated.

http://www.amazon.com/3M-Scotch-Brite-Varnish-Remover-9414NA/dp/B000BQWPAQ

drill and wire wheels used to remove rust

After the headers are cleaned of paint and rust to bare metal they need to have any grease removed before they can be painted. Carb cleaner, paint thinner or acetone are good cleaners for grease. There are also specific grease removers for this. I used carb cleaner and and a new clean shop rag. After that, you can prime the bare metal headers. VHT sells a primer specifically for use with their paint. VHT Flame Proof is the specific brand they use for 1200-2000 degrees F. This is header specific coating. They also have lower temp paints for engine blocks and brake calipers or drums. I followed the directions on the can to apply 2 light coats 10 minutes apart and a medium coat. This makes it so all coats are tacky and you don’t have to sand in between them. Holding anything when painting it is difficult. I hung the parts from a nail on the wall, as seen in the picture. Wire from a rafter or cherry picker (engine lift) works also. Make sure to not get overspray on anything when painting! After the primer stage let dry for 24 hours at least. I lightly sanded the headers with 200 grit sandpaper then sprayed 3 coats of VHT Flame Proof paint. The VHT website is a bit confusing as they say there is not VHT Flame Proof primer, but the can specifically says use a VHT Flameproof primer, and I was able to buy VHT Flame Proof primer. The name primer was only on the bar code. It’s not on the label anywhere else. I’ll have to get in touch with VHT on this. Anyway, after VHT Flame Proof paint is applied, it needs to be cured. First it has to dry for at least 24 hours. After that it needs to be headed to cure. This can be done in an oven or on the engine with light running, letting the headers cool, and later a harder run to get them hotter.
http://www.speco.com.au/vht_faq.html

Headers hanging on the wall being painted. 3 coats seemed to be about right. I also had 2 coats of VHT primer.

Headers after they have been cleaned and repainted, and re-installed. Don’t they look so much nicer? Also they should not rust away for some time! Disregard the dirty charcoal canister, radiator, inner fender wells and valve covers.

Well, hopefully you’ve learned a few things about headers in this article, and why you should buy them for your car, immediately.
Do you have a car with headers?
What was the first performance upgrade you did to your car if it wasn’t headers?
Keep the rubber side down! (Don’t forget to follow my blog (upper right, just type in your email and be sure to confirm once you get an email) so you don’t miss a new post!)
Also if you enjoy this, please share with your friends, on Facebook or in person even!

5. My Wheel Life – Car spotters guide to the galaxy (1920’s to 1960’s) (Part 1)

Posted on May 28, 2014 by hooglanda

Quartermile:
There are a TON of different ways to build a car.
You can build the same car in multiple different styles.
One car can sometimes mix and match from various styles. This can turn out good or bad depending on the builder.
This guide will tell you about all (that I could think of) different “styles” in which people around the world build up their cars.
Often these are regional since different cars were sold in different places around the world.

Lets Ride:

The first installment of car spotters guide to the galaxy will cover styles of cars that can be built off cars that were originally made between 1920 and ending about 1960. These dates are by no means concrete, but are to give you a general idea.

Restored – This is any type of car restored to stock. This can be applied to vintage cars (1930’s), muscle cars, old exotics or any other car. The process can become so intensive that the restorer will replicate the overspray and other mistakes that were present on many factory original cars from the era the car was new.
http://www.mafca.com/

Traditional hot rods – These are recreations of hot rods in a style that would have been seen in a specific era. Early hot rods replaced original 4 cylinder engines with the newer and larger early V8’s and straight 6 and 8 cylinders. This style is often strict on using parts that were only available in the year they are trying to emulate. For example, a classic hot rod built in a 1930’s style could have used a flathead ford engine (introduced in 1932) but not a small block Chevrolet engine (introduced in 1955).

Rat rods – These are an evolution of Traditional hot rods. Rat Rods will use parts from any era. Often they can use large engines and different engines are appreciated here. The rule for rat rods is to stand out. They often reflect their owners. Diesel engines, turbochargers, wild exhaust systems, bomber seats and large shifters are the norm for rat rods. The interior of a rat rod has very few requirements. Comfort is definitely not a priority for most rat rods. Rat Rods are often art cars and they generally are not representative of real cars ever made in previous eras. Rat rods are often based on car bodies built between 1920 and 1950 but the rat rod style can be applied to any body style. Flat black and rust are 2 popular finishes for the bodies of rat rod vehicles. .To the untrained eye rat rods can appear to be traditional rods, but if you look closer and can identify newer parts or generally “rough” appearance or any parts that were not available between 1930 and 1960 you probably have a rat rod.

http://www.olskoolrodz.com/

Rat Rod truck

The rust surface finish, few mufflers on the exhaust headers and Punisher spray painted in the grill are clues that this car is all about fun and is a rat rod

If you look closely you can see the super charger does not actually have a belt driving it, thus making the super charger non-functional. The rust finish and general cartoon-like appearance allude to the fact that this car is definitely a rat rod. – I love this car. It demands attention, which is the goal of a rat rod.

Street rods – Street Rods are generally build on cars made between 1920 and 1950. They are sometimes called Billet rods. Billet refers to a part that has been machined from a large piece of aluminum. For street rods billet can be used for rims, shifters and any smaller parts on the engine. Billet parts were not extremely popular until the 1980’s and later. Billet is often frowned upon by traditional hot rod purists. These cars are often nicely restored. They have nice paint jobs, nice interiors and clean suspensions. These cars have lately become somewhat less popular as rat rods have risen in popularity in the last few years.
http://www.streetrodderweb.com/

This street rod is easily identified as such by the bright paint and chrome rims. The chrome side mirrors and recessed head lights and general “clean” and “smooth” appearance also are all dead giveaways that this is a street rod.

The nice paint, clean engine with a lot of chrome and billet rims give this car away as a street rod.

Custom – Customs are cars that were modified for looks rather than speed. Often these are based on bars built from the 1940’s to 1960’s. These cars are often long and low. Coils were cut or heated to lower these cars originally. These days, cars can often use air bags to give the car a low stance but all it to be raised to a comfortable and safe height for driving. These cars often have nice finished interiors and lots of chrome on the engine.
http://www.streetrodderweb.com/

This custom is identifies by it’s lack of billet rims and clean paint.

This car is a custom. It is identified as such because it is based on a 1950’s car and has clean paint, is lowered and has a clean interior but does not have billet rims.

Gasser – Often streetcar styles are based on race cars. Gassers are one of those styles. A gasser is based off drag racing technology and classes that started in the 1950’s and continued through the 1970’s. These were generally based on cars built between the 1930’s-1960’s and were usually American 2 door cars. The front of a gasser is lifted and usually rides on a straight axle. Slicks are an important part of the drag racing vibe also. Gassers sit high in the front. The stance was for better weight transfer to launch the drag car off the line.

This car is easily identified as a gasser because of it’s “nose high” stance and slicks. The name, “Wicked” also is a nod to vintage race cars often being named. The hood scoop and lack of billet rims are also both good indicators that this is a gasser.

This gasser is easily identified as such by it’s high stance (relationship of body to wheels). The front is much higher than a stock car. Also the lack of inner fender wells and the fact that it has fender well headers and the vintage appearing sponsor lettering point that this is a gasser, and a very nicely done one at that.

I hope you enjoyed the first installment of car spotters guide to the galaxy. Stay tuned for future posts that show you how to identify various styles of muscle cars, trucks, imports and more!

Visit us on Facebook

	Rome, FED, Debasemen… on Bitcoin Intrinsic Value
	Rome, FED, Debasemen… on Maintain Purchasing Power
	Lacey Fowler on 6. My Wheel Life – How t…
	Abigail Disney \| MyW… on Mark Zuckerberg – Basic…
	HW James on Can I buy a Tesla in Iowa?…

MyWheelLife.com

Fostering Understanding Through Discussion

Tag Archives: rat rod